copy of Charge controller 35A MPPT 150/35 SmartSolar - Victron Energy
zoom_out_map
chevron_left chevron_right
Reduced price

copy of Charge controller 35A MPPT 150/35 SmartSolar - Victron Energy

Integrated Bluetooth Smart: no electronic key needed

Ultra fast location of the maximum power point (MPPT)

Battery Life: intelligent battery management

€161.10 €214.80 -25%
VAT included
  Shipping costs to be calculated

Depending on your postal code

 

Delivered to you in 2/5 days

  Free store pickup

Warehouse - TEYRAN 34820

 

Description

Integrated Bluetooth Smart: no electronic key needed

The wireless solution for configuring, monitoring and updating the controller using Apple and Android phones, tablets or other devices.

 

VE.Direct

For a wired data connection to a Color Contrai control panel, a PC or other devices.

 

Ultra fast location of the maximum power point (MPPT - Maximum Power Point Tracking).

Especially in cloudy skies, when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy collection by up to 30% compared to PWM charge controllers (pulse width modulation), and up to '' at 10% compared to slower MPPT controllers.

 

Load output

Excessive discharge of the battery can be avoided by connecting all the charges to the charge output.

The charge output will disconnect the charge when the battery has been discharged to a predetermined voltage.

Otherwise, an intelligent battery management algorithm can be chosen: see Batterylife. The load output is protected against short circuits.

 

Battery Life: intelligent battery management

When a solar charge controller cannot fully charge the battery in one day, it often results in the battery constantly alternating between a "partially charged" state and an "end of discharge" state. This operating mode (non-regular full recharge) will damage lead-acid batteries in a few weeks or months.

The Batterylife algorithm will control the state of charge of the battery, and if necessary, slightly increase, day after day, the level of disconnection of the charge (i.e. it will disconnect the charge earlier), until that the solar energy produced is sufficient to recharge the battery to almost 100% of its capacity. From there, the load disconnection level will be modulated so that a recharge of almost 100% is achieved at least once a week.

 

Programmable battery charge algorithm

See the Downloads> Software section on our website for more details.

 

Night / Day option and light dimmer

See the Downloads> Software section on our website for more details.

History and real-time data display options, programming

Modern Apple and Android smartphones, tablets, macbooks and other devices: see the screenshots on the MPPTet application discovery sheet of the VE.Direct Bluetooth Smart dongle.

ColorControl control panel

Data sheet

SCC020035000
2 kg
Data sheet
Technologie
MPPT
Weight
1.25
Garantie
5 years
Battery voltage
12V / 24V / 48V
Courant de charge nominale
50 A
Brand
Victron Energy
Dimensions (H x L x P)
130 x 186 x 70 mm
Charging voltage "Float"
Default configuration: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
Maximum open circuit PV voltage
150 V maximum absolute in the coldest conditions 145 V maximum for start-up and operation
Internal consumption
10 mA
"Absorption" charge voltage
absorption »Default configuration: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
Temperature compensation
-16 mV / -32 mV / -64 mV / °C
Operating temperature
-30 to +60 ° C (nominal output power up to 40 ° C)
Humidity
95%, non-condensing
Data communication port
VE.Direct
Power terminals
13 mm² / AWG6
Degree of protection
IP43 (electronic components), IP22 (connection area)
certificates
EN/IEC 62109-1
Rated PV power, 12 V
500W
Rated power PV, 24V
1000W
Max. PV short circuit current
40A
Peak efficiency
98 %
Charging algorithm
Adaptive to multiple stages (eight preprogrammed algorithms)
Protection
Reverse polarity of the battery (fuse, not accessible by the user) Reverse polarity PV Short circuit at output Overheating
Rated PV power, 48 V
2000W
Bluetooth intégré
Non

Shipping cost

Le frais de livraison sera automatiquement calculé en fonction de votre adresse de livraison une fois que vous aurez saisi votre code postal.

  

·        Retrait en Magasin gratuit (Entrepôt - Teyran 34820)

·        Retrait Lyon gratuit - Uniquement sur RDV( Vénissieux - 69200)

               

·        Par DPD : les frais de livraison sont calculés par les poids de commande.

·        Par transporteur DB SCHENKER : les frais de livraison sont calculés par les poids de commande et l’adresse de livraison.