Convertisseur 500VA 12/500 pure sinus Phoenix VE.Direct-Victron Energy
chevron_left chevron_right
Reduced price

Convertisseur 500VA 12/500 pure sinus Phoenix VE.Direct-Victron Energy

High level of reliability - Designed for many years

Powerful pulses - High peak output

Intelligent alarms, stops and restarts

€169.32 €199.20 -15%
VAT included
  Shipping costs to be calculated

Depending on your postal code


Delivered to you in 2/5 days

  Free store pickup

Warehouse - TEYRAN 34820



VE.Direct communication port

The VE.Direct port can be connected to:

A computer (VE.Direct-USB interface cable required).

Apple and Android smartphones, tablets, macbooks and other devices (a Bluetooth Smart electronic key communicating with VE.Direct is required).


Fully configurable:

Reset levels and alarm triggering in case of low battery voltage

Restart and shutdown levels in case of low battery voltage

Dynamic shutdown: cutoff level depending on the load

Output voltage 210 - 245 V

Output frequency 50 Hz or 60 Hz

ECO mode detection level and ECO mode on / off



Input and output voltage,% of load and alarms


Recognized reliability

The complete bridge topology with a toroidal transformer has proven its reliability for years. The converters are protected against short circuits and overheating, whether in the event of overload or high ambient temperature.


Strong starting power

Required to start loads such as power converters for LED bulbs, halogens or power tools.


ECO mode

In ECO mode, the converter will switch to pause if the load drops below a predetermined value (minimum load: 15 W). Once paused, the converter will light up for a short period of time (adjustable; default: every 2.5 seconds). If the load exceeds a preconfigured level, the converter will remain on.


On / off remotely.

A remote ignition / stop switch can be connected to a two-pole connector or between the positive pole of the battery and the left contact of the two-pole connector.


Diagnostic LED

Please see the manual for a description.


To transfer the load to another AC source: the automatic transfer switch

For our low power converters, we recommend the use of our Filax automatic transfer switch. The Filax has a very fast transfer time (less than 20 milliseconds) so that computers and other electronic equipment can continue to operate without interruption.

Data sheet

5 kg
Data sheet
5 years
Battery voltage
12 V
AC output voltage
Puissance de sortie (AC)
Victron Energy
Dimensions (H x L x P)
86 x 172 x 275 mm
Voltage range
9.2V- 17V
50 Hz
Peak power
Type de signal
Signal type
Standard AC outlets
Schuko FR
Output short circuit / overload / battery voltage too high / battery voltage too low / temperature too high
Degree of protection
EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Continuous power at 40 ° C
Max efficiency
No-load consumption
ECO mode no-load consumption
Low battery restart
Detection of charged battery
Operating temperature
-40 to + 65 ° C (fan cooling)
Material and color
Steel frame and plastic cover (Blue RAL 5012)
Battery connection
Screw terminals
Maximum cable section
10 mm² / AWG8
Remote on / off switch
Automatic transfer switch

Shipping cost

Le frais de livraison sera automatiquement calculé en fonction de votre adresse de livraison une fois que vous aurez saisi votre code postal.


·        Retrait en Magasin gratuit (Entrepôt - Teyran 34820)

·        Retrait Lyon gratuit - Uniquement sur RDV( Vénissieux - 69200)


·        Par DPD : les frais de livraison sont calculés par les poids de commande.

·        Par transporteur DB SCHENKER : les frais de livraison sont calculés par les poids de commande et l’adresse de livraison.