FUSIBLE MEGA-FUSE 200A/32V POUR SYSTEME 12V / 24V
Very easy programming
Load disconnection and reconnection time
Surge protection
Depending on your postal code
Delivered to you in 2/5 days
Warehouse - TEYRAN 34820
Description
The BatteryProtect protects the battery by disconnecting it from non-essential charges before it is completely discharged (which would damage it) or before it does not have enough power left to start the engine.
Very easy programming
BatteryProtect protection can be configured to activate / deactivate at different voltage levels. The 7-segment display will indicate which configuration has been chosen.
A special configuration for lithium-ion batteries
In this mode, the BatteryProtect can be controlled by the BMS of the VE-Bus.
Very low energy consumption
This is an important feature for lithium-ion batteries, especially after stopping at low voltage. Please see our technical sheet for lithium-ion batteries and the VE.Bus BMS manual for more information.
Surge protection
To avoid damaging the loads that are sensitive in the event of an overvoltage, the load is disconnected if the DC voltage exceeds 64 V.
Protection against combustion
No relay, but MOSFET transistors, and therefore there are no sparks.
Delayed alarm output
The alarm output is activated if the battery voltage drops for more than 12 seconds below the predetermined disconnection level. Starting the engine will therefore not activate the alarm. The alarm output is an open collector output protected against short circuits which is connected to the rail (negative), maximum current of 50 mA. The alarm output is generally used to activate a buzzer, an LED indicator or a relay.
Load disconnection and reconnection time
The load will be disconnected 90 seconds after the alarm is activated. If the battery voltage increases again to the connection threshold during this period (when the engine has been started for example), the load will not disconnect. The load will be connected again 30 seconds after the battery voltage has exceeded the preset charge reconnect voltage.
Data sheet
Shipping cost
Le frais de livraison sera automatiquement calculé en fonction de votre adresse de livraison une fois que vous aurez saisi votre code postal.
· Retrait en Magasin gratuit (Entrepôt - Teyran 34820)
· Retrait Lyon gratuit - Uniquement sur RDV( Vénissieux - 69200)
· Par DPD : les frais de livraison sont calculés par les poids de commande.
· Par transporteur DB SCHENKER : les frais de livraison sont calculés par les poids de commande et l’adresse de livraison.
verified reviews(10)
Roger D. published the 17/01/2024 following an order made on 17/01/2024
Rien à signaler
Eric H. published the 24/11/2023 following an order made on 24/11/2023
Conforme
Francis C. published the 07/08/2023 following an order made on 07/08/2023
conforme
Anonymous A. published the 09/02/2023 following an order made on 28/01/2023
Pas encore mis en place
Anonymous A. published the 19/12/2022 following an order made on 07/10/2022
pas encore mis en place
Anonymous A. published the 22/08/2022 following an order made on 22/08/2022
bien
Anonymous A. published the 29/06/2022 following an order made on 29/06/2022
Bien
Anonymous A. published the 20/03/2022 following an order made on 20/03/2022
Produit ok
Anonymous A. published the 18/03/2021 following an order made on 18/03/2021
bonne qualité
Anonymous A. published the 01/12/2020 following an order made on 01/12/2020
Fait le job